POWER ACOUSTIK GOTHIC SERIES 1600 WATT AMP

Some amplifiers that might work well for you: Posted by Terry Dorsett on Feb 04, Switch it to “LP” as this will allow only low frequencies to go to your subs, what you want. Ground to something in trunk. Most amps will have several power ratings, based on the load impedance and number of channels driven. I suggest to use one channel in stereo mode , or purchase another sub to use the other channel. Posted on Jan 21, The power rating you’ll want to look at will be the 1-channel, 4-ohm rating.

I checked the power ratings, and bridged at a 4 ohm load will give you rms watts per sub, so thats enough to run most 10’s or 12’s. Jul 05, Kicker C Car Subwoofer. Don’t forget to rate the overall answer to your question. Login to post Please use English characters only. If you don’t have that switch, go to an audio store or online audio supplier and get either a low pass filter, band pass filter, or a cross-over, and follow the wiring diagram that comes with it to filter out the high frequencies before they get to your subs. Posted on Aug 03, Some amplifiers that might work well for you:

POWER ACOUSTIK – OV – Gothic Series 4-Channel Amplifier with Hyper Bass

Hi there, Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

More Print this page Share this page. Remote to blue lead on radio. Posted by Terry Dorsett on Feb 04, Thank you for using Fix Ya! Most amps will have several power ratings, based on the load impedance and number of channels driven.

Power Acoustik Gothic OV2-1600 – car – amplifier

Depending on your budget, I’d look for an amp rated for watts minimum; the higher, the better, up to watts. You can’t post answers that contain an email address.

  ABAKWAZIDENGE XHOSA DRAMA

Ground to something in trunk. Posted on May 13, Please enter a valid email address. You can look at mono amps, too, but in the power ranges you’re looking for, a 2-channel amp will probably give you the best value. Rca to line or sub out on radio.

If they are wired for the proper impedance, check each voice coil with an ohm meter to make sure none of the voice coils are shorted. If you don’t have that switch, go to an audio store or online audio supplier and get either a low pass filter, band pass filter, or a cross-over, and follow the wiring diagram that comes with it to filter out the high frequencies before they get to your subs.

It’s worth a thousand words. Posted on Jan 21, Here’s a link to this poower service Good luck! However, if you can find a mono amp with a high enough 4-ohm power rating, it would run cooler and might last longer than a 2-channel amp with comparable power.

I suggest to use one channel in stereo modeor purchase another sub to use the other channel. Don’t forget to rate the sseries answer to your question. You can’t post conmments that contain an email address. Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

If it doesn’t get hot, check the impedance of the speakers and make sure they’re wired properly. Jul 05, Kicker C Car Subwoofer.

Switch it to “LP” as this will wcoustik only low frequencies to go to your subs, what you want. In your case, the sub is rated for watts. Ask a Question Usually answered in minutes! If it still gets hot, the amp needs to be repaired. Login to post Please use English characters only.

  ARROW EPISODE 20 STREAMZZZ

Add Your Answer Tips for a great answer: Click “Add” to insert your video. I have freestanding Series 8 dishwasher. The Knight Level 3 Expert Answers.

The power rating you’ll want to look at will be the 1-channel, 4-ohm rating.

May 06, Kicker 06ZX Not finding what you are looking for? A typical 2-channel amp might be rated like this: How big of am amp do i need? Posted on Oct 09, Lately during the filling cycle water hammer is occurring.

Helpful 0 Not Helpful Flag. Posted on Jan 28, Kicker doesn’t list a minimum power rating, which isn’t unusual in subwoofer specs.

Power Acoustik BAMF-1600/4

I checked the power ratings, and bridged at a 4 ohm load will give you rms watts per sub, so thats enough to run most 10’s or 12’s. Some amplifiers that might work well for you: The max point reward for answering a question is How can this be resolved.

Please assign your manual to a product: When looking at mono amps, you’ll find their highest power output will be at 2 ohms or 1 ohm; make sure you’re checking the 4-ohm rating when making comparisons. Your answer needs to include more details to help people. Depending on what kind of music you listen to I would say around a Watt Amp would suffice for what you are saying.

Answer questions, earn points and help others Answer questions.

Author: admin