HOBBYKING SS SERIES 25-30A ESC THROTTLE RANGE

Again, thanks for the info. Range going to be ok? Find More Posts by dogwood Sign up for a new account in our community. The arm tone is put out when it thinks it is at min throttle. I also tried a 2 cell mah. Thanks for watching the vid and for the advice. Posted April 24,

Find More Posts by tobydogs. You have a hawkeye to spot that! Find More Posts by Live2Fly. Find More Posts by richgrow. Posted April 23, The low voltage cutoff also fails to work if your system is pulling low amps. Register a new account. All did the things.

Already have an account?

Hobby king esc’s any good? – WattFlyer RC Electric Flight Forums – Discuss radio control eflight

I’ve also used their cheaper towerpro ESCs a couple of times On the video I don’t fully unplug the lipo in all cases inbetween doing the arming process. Looks like your doing the right thing? Turn off your TxThe Rx should go in to fail safe mode if it has a safe mode Find More Posts by Gary Hobbykng. Can I safely just pick the item that “should” work ok, and expect it to do so?

Nano tech ‘s and rhino s.

Havent had a problem after original parameter programming. They are much cheaper than their 4channel alternatives and more readily available.

  NUOVO CINEMA PALMARO PRA GENOVA

Hobbyking SS Series A ESC (Opto only)

Thread Tools Show Printable Version. This shows up because you get the arm-tone 3 beeps for 3 cell lipo and a slur-up note yet the motor will not run.

The Turnigys are of course the easiest with the cheap little programming card they sell.

Mine is also connected directly to the flight battery using a Y cable so there is no extra RX battery to haul around. Rest assured though that before I recorded the video I had performed the same steps but fully unplugged. I got my easy star from hobby people, thhrottle is ran by hobby king. They are working fine, about a year now.

Have an SS that I have not tried yet but understand they get real hot when you program them. Posted April 24, edited.

Hobbyking SS Series 40-50A ESC (Opto only)

Visit Blue Note’s homepage! The last one I’ve used was a little Mystery brand 12A controller Find More Posts by Blue Note. Ya ubec is the safe way to go. A lot cheaper and fast shipping.

Isn’t that what Hobbykinv did in my video though: Thanks for watching the vid and for the advice. Jeff at HURC has them cheaper and will handle that many servos no problem.

  ESSCHERT DESIGN CAST IRON COOKBOOK STAND

Whatever UBEC you buy, be sure it will handle the input voltage. Go To Topic Listing Helicopters. Sign in with Google.

Hobbyking SS Series 190-200A ESC

There’re a couple of tutorials on Youtube and a great explanation of multirotor settings for ESC when using a programing card on oddcopter. They are more than needed only 50 amp was needed for the motors and with the cheap stuff its better that way. Can I bind a dsm tx dx4e to a 6 channel receiver orange rx ? No idea what I did that time and it still didn’t the arm the esc They work well and allow the sss to turn up well, but they seem to give out and start having problems such as intermittent connections and eventual failure.

I know this because the servos move and because the esc responds to full throttle by going into programming mode. I will move onto something else when I have run out of the ones I have on hand.

Author: admin